THE BORE
General => Video Game Bored => Topic started by: hyp on January 14, 2008, 02:28:48 PM
-
http://www.dcemu.co.uk/custom-firmware-3-80-m33-has-been-released-85553.html
3.80 M33
--------
Requeriments:
- Installation requires a PSP with 3.52 M33-3 or higher. In the future installation using
panddra battery will be released.
Instructions
- Copy the UPDATE folder into /PSP/GAME/
- Get the 3.80 sony update from somewhere, and put it in same folder, with name "380.PBP".
- Run it, the update will be done by Sony updater. At the end when you are asked to reboot the
PSP pressing X or O, do it.
Changes:
- HEN core: user mode can load now signchecked files from flash.
- recovery: flash1 format will create flash1 directories after format.
This could fix some flash1 issues with the previous versions.
- Network update from dark-alex.org page. By default is enabled.
You can turn it off in recovery (when off, network update will download sony updates as usual).
- Nids resolver for various kernel libraries.
Comments:
In 3.80 sony has changed (again) kernel nids. The nids resolver will resolve a lot of nids from firmwares 1.50-3.60
(traditional nids) to the ones of 3.80 kernel.
In general, 3.71 nids will NOT be resolved to 3.80 ones. However, to compatibilize 3.80 M33 with prx's programmed for 3.71,
a few very 3.71 nids that were found in some 3.71 plugins will be resolved too.
More info about what is resolved in nidsresolver_status.txt.
Thanks to the combination of the nids resolver and the user libraries possibility in kernel mode added back in 3.71 M33-3,
some programs that stopped working in 3.30 M33 may work again now. One of them is PimpStreamer 0.90.
Finally, popsloader plugin from 3.71 will not work in 3.80 M33 due to its system dependancy. A new one will be rewritten for 3.80 M33.
-
Sooooo, I can use this on my Sony 3.71 FW?
And do I still have to have that battery to load it?
-
You have to have an already hacked psp in order to update cfw.
-
the network update sounds kinda cool. i wonder what will come of that.
-
the network update sounds kinda cool. i wonder what will come of that.
it's basically an easy and fast way to upgrade from say 3.80 to 3.80 revision 2/3 etc.
-
Maybe this week I'll figure out how to update and be a NEW MAN
-
http://pspupdates.qj.net/Dark-AleX-s-CFW-PSP-3-80-M33-released-Update-/pg/49/aid/111427
*Update* We hear from NorthenFusion in our forums that Dark AleX has given some clarifications on CFW 3.80 M33. As some have reported, they've already encountered some problems upon installing the latest custom firmware. Here's what DAX has to say:
Originally Posted by Dark_AleX:
I will implement 1.5 kernel on fat, but it just doesn't have to come the same day as 3.80 M33, but unfortunally there will be always some side effects in the 1.5 kernel, like sleep mode not working properly 100%.
-
i'm way behind in the firmware update game. i think i'm still on 3.40 OE-A. :'( once alex gets these fixes in, i think it's time to upgrade.
-
i'm still on 3.52-4 m33
i will wait for a new version or 3.80-4 m33.
-
worthless upgrade, it sounds like sony is getting the best of dark alex
-
3.10 OE-A
-
demi, how easy/hard is it to upgrade to a newer version of M33 coming from OE-A?
-
demi, how easy/hard is it to upgrade to a newer version of M33 coming from OE-A?
it's easier iirc.
-
demi, how easy/hard is it to upgrade to a newer version of M33 coming from OE-A?
- Installation requires a PSP with 3.52 M33-3 or higher.
Download 3.52M33 install, bump up to M33-4, then run 3.80 or 3.71 CFW installer, simple
or,
run pandora
-
I'll wait until there's a revision or two. The last two releases, jumping on an update early meant you were basically beta testing it.
-
Anyone get Chronor Cross working yet? I have a copy but it just black screens blahhhhhhhhh
-
Anyone get Chronor Cross working yet? I have a copy but it just black screens blahhhhhhhhh
You have to change the Game ID to that of Syphon Filter 3's
start > run > cmd
popstation_md.exe "Chrono Cross" "Disc 1" "Disc 2" SCUS94640 SCUS94640 SCUS94640 9 9 "X:\ChronoCrossA.iso" "X:\ChronoCrossB.iso"
-
Anyone get Chronor Cross working yet? I have a copy but it just black screens blahhhhhhhhh
3.72: Use popsloader and 3.71-4 m33 to run 3.72 pops. Use GameID SCUS-94640 and it wont freeze on character status or the first boss Mama Komodo! This GameID also works great on 3.40 and 3.51, plus it has no slowdown like the other ID.
http://www.gamerspress.com/index.php?title=PSX_on_PSP_Compatibility_List
-
for joining CC discs or any other multi disc game:
http://pspupdates.qj.net/RS-GUI-PopStationMD-v2-0-for-DAX-multidisc-Popsloader/pg/49/aid/109790
thanks to demi for the program.
-
Let's test this.
-
The eboot I have for Chrono Cross is a single EBoot, im not familiar with popstation, I just had TVC do the battery thing. Most games work fine without tweaking.
-
it's probably just Disc 1
-
it's probably just Disc 1
Or maybe it's a joined one.
anyway, i installed 3.80 M33 and i am pleased, here is why:
1- easy to update, all i had to do is copy 3.80 M33 UPDATE folder and copy Sony fw 3.80 inside the same said folder. (this is of course running from 3.52M33-3 or higher)
2- update is now the same as the official one, few clicks and legal crap and you are done.
3- network update is soooo goood, i just updated from 3.80 M33 to revision 2 (3.80-2 M33) with ease, very fast and efficient.
-
nice. time for me to upgrade my shitty ass 3.40 fw tonight.
-
nice. time for me to upgrade my shitty ass 3.40 fw tonight.
http://forums.exophase.com/showthread.php?t=2732
use this guide to go to 3.52 and after that grab revision 4: http://exophase.com/files/psp/M33-1234.zip (copy pasta link)
from there you can update to 3.80 with ease.
note: http://www.neogaf.com/forum/showpost.php?p=9323605&postcount=270 if you get this error, you know what to do (recovery mode = hold R while booting)
-
you the man mcdragon!
-
you the man mcdragon!
hyp :bow
if anyone is interested in a screenshot plugin, here is a good one: http://www.qj.net/Screenshot-Plugin-3-71-2-in-game-bug-fix/pg/49/aid/109406
and here is how to install it (special thanks to SupahBlah from GAF):
Put "ScreenShot.prx" inside the folder "seplugins" (put this folder in psp root or main directory)
Create a txt file called "VSH" and one called "GAME" and put the line:
ms0:/seplugins/screenshot.prx
In both, then using the recovery console (holding R when booting the psp) click 'Plugins' and turn on both screenshots to enabled, then click exit and you'll boot to the psp main menu.
Then all you have to do is click Note (the musical note next to the select button) and a picture will be in your memory stick. (PICTURE\ScreenShot)
(http://i8.tinypic.com/8fbpd6t.jpg)
-
1.50 Kernel addon for 3.80 (Only for fat!) is out:
http://www.dark-alex.org/150k_addon.rar
instructions:
1- Copy the files in the release to a directory called UPDATE
2- Move the UPDATE directory to PSP\GAME150 (try PSP\GAME380 if it doesn't work)
3- Get sony 1.50 update and copy it to the root with name: 150.PBP
4- Run the program under GAME
-
:bow mcdragon
-
I bricked my PSP upgrading from 3.40 OE to 3.71-M33 or whatever. Thank goodness for recovery mode. At some point I need to make one of those batteries.
-
Did you try to upgrade directly from 3.40 OE to 3.71 M33?
-
I bricked my PSP upgrading from 3.40 OE to 3.71-M33 or whatever. Thank goodness for recovery mode. At some point I need to make one of those batteries.
because you're not supposed to - you go to 3.52 m33-4 first
lrn2red
-
what firmware do i have i wonder
-
doop doop
3.71 m33-4 w/ 1.5 kernel
-
i updated the instructions, navanman's instruction didn't work.
-
hey dudes, so i'm finally at 3.80 M33... but now my ps1 games don't work. do i need to reconvert them or something? i installed the latest popsloader plugin as well. =\ is there even a new version of popstation?
-
hey dudes, so i'm finally at 3.80 M33... but now my ps1 games don't work. do i need to reconvert them or something? i installed the latest popsloader plugin as well. =\ is there even a new version of popstation?
first update to 3.80 m33 revision 5 (network update!)
then get the 3.80 M33 Popsloader here: http://dark-alex.org/
-
thanks i just did the network update. now i'm looking for the prx files of all the popsloaders. man i'm totally outta the loop.
-
3.80 is soooo broken, downgrade
-
If ps1 games don't still work, try to mess with the recovery mode, like try to disable everything or something.
also, make sure your ps1 games are under folders.
like GAME/FF7/
and as far as i know, ps1 games have: eboot + a key file, so make sure both are under the same folder.
-
3.80 is soooo broken, downgrade
Even with the fourth update (M33-5)?
-
M33-5 runs everything I throw at it! Hooray
I just put Tempest X3 on my PSP and now is like having a portable Atari Jaguar! Well uh, you know, a portable Jaguar that only plays Tempest and not Air Cars or Cybermorph
-
what emulators do you guys use?
if you have any recommendations, let me know. here are the ones i think work best (so far):
- cps1psp (capcom cps-1)
- cps2psp (capcom cps-2)
- mvspsp (neo geo)
- nesterj (nes)
- snes9xTYL (snes)
what's the best genesis/megadrive emulator?
-
So M33-5 runs PSX games well, huh? I can just go from 3.80 M33 to M33-5, right? Haven't messed with PSX emulation on PSP in a while...maybe Ghost In The Shell will finally work now.
Also what's the best way to make images of PSX games? I forgot! :lol I have Alcohol 120%.
what's the best genesis/megadrive emulator?
Picodrive. It also supports Sega CD games. Portable Snatcher! :hyper It didn't play Popful Mail the last time I tried it though.
-
So M33-5 runs PSX games well, huh? I can just go from 3.80 M33 to M33-5, right? Haven't messed with PSX emulation on PSP in a while...maybe Ghost In The Shell will finally work now.
Yeah, it's been quite a while since I tried PSX games because I'd updated to some retardo firmware without POPS support. Tempest X3 now runs at 60fps :O Installed the original Dead or Alive, which trucks along at 60fps perfectly too. If you run it in "zoom" mode it seems to be proper 1:1 pixel mapping...I assume that's because it was a high-resolution game to begin with.
I also dorked around with Remote Play of PSX titles, it was shockingly playable. Tried popping a DiVX disc into the PS3 and playing those via remote play, which made the PS3 promptly crash. Nice job sony
-
Also what's the best way to make images of PSX games? I forgot! I have Alcohol 120%.
http://www.imgburn.com/
-
how do i play psx games on psp?
what do i need? is popsloader some kind of program?
firmware 3.71 m33-4 here
-
1- rip ps1 game discs to isos with this: http://www.imgburn.com/
or you can download them if you so desire.
2- convert iso to eboot using this:
http://pspupdates.qj.net/Yet-Another-GUI-for-Popstation-v1-0/pg/49/aid/77618
simple and straightforward, if you need a more advanced program (multi discs joiner...etc..) use this:
http://pspupdates.qj.net/RS-GUI-PopStationMD-v2-0-for-DAX-multidisc-Popsloader/pg/49/aid/109790
3- put the converted eboot + keys files in a folder and place it in your PSP GAME folder.
-
picodrive is fantastic. just loaded it up today and OMG everything runs at 60fps so far.
-
1- rip ps1 game discs to isos with this: http://www.imgburn.com/
or you can download them if you so desire.
2- convert iso to eboot using this:
http://pspupdates.qj.net/Yet-Another-GUI-for-Popstation-v1-0/pg/49/aid/77618
simple and straightforward, if you need a more advanced program (multi discs joiner...etc..) use this:
http://pspupdates.qj.net/RS-GUI-PopStationMD-v2-0-for-DAX-multidisc-Popsloader/pg/49/aid/109790
3- put the converted eboot + keys files in a folder and place it in your PSP GAME folder.
Thank you. I kept reading "Popstation" everywhere and thought it was some mystery program I could never find
-
Wow, that worked perfectly. even without the second analog stick, MOH plays better on the PSP than it does on my PS3.
I think I'm gonna need another external hard drive.
-
huh, ff7 pal rip crashes when entering a battle.
-
Does Sonic CD run well on Picodrive?